When adding a Section Template, the System is designed to know whether you are working from a current MasterFormat™ or MasterFormat™ 1995 Master. Therefore, when the Template Tab is chosen the correct format will be the default setting.
The system will also warn you when attempting to mix current MasterFormat™ Sections with MasterFormat™ 1995 Sections. This process is not recommended, as it will cause Section Reference and Report Issues. It is recommended to find the appropriate current MasterFormat™ Section to edit rather than using an older Section for the project.
For more information on Section Numbers see Numbering Rules.
You can create as many Sections from templates as you want. (The Section Titles must be entered between the Title tags using the Editor.) All Sections you create with templates will be listed in the right pane of the dialog box, with the pending action add or overwrite listed beside it.
Right-clicking on a Section with an action pending will allow you to choose to Undo the action and remove the Section from the Contents pane.
If you choose a Section that is already in the Job, you will be asked if you want to overwrite it. Keep in mind that if you overwrite a Section that you have already edited, you will lose your changes.
OK will execute all the pending actions listed.
Cancel will close the dialog box without executing any of the pending actions.
When the pending actions are executed, you will see the Sections you created with templates listed in the right pane of the SI Explorer view of your Job.
How To Add A Section Template:
If you selected "current", choose the appropriate level as shown below.
If you selected "1995" simply type the five or six character number in the text box.