NASA Sections and Divisions

 

 

HomeMasters

Master download instructions:

  • Download individual SGS Master specification Sections by clicking the Download arrow icon button to the left of the Section numbers. All Section files have been compressed with WINZIP.

  • To view or print a Section, click the PDF button below the Section Number (you will need the free PDF Reader).

  • See Technical Note for information on using these Masters with SpecsIntact.

  • The SGS Master is now MasterFormat 2004. In order to have access to the current NASAKSC MasterFormat 95 Specifications you should rename your current SGS Master to MF95SGS then proceed with downloading and restoring the latest Master. If you already downloaded and replaced your MasterFormat 1995 Master with the latest MasterFormat 2004 version, click here to download.

If you'd rather download the entire Master or individual Divisions, use these links:

Download SGS MASTER

Updated: April 28, 2008

Download DIVISION 01 - GENERAL REQUIREMENTS

Download PDF
01 11 00.00 99
(01110J)
12/06 SUMMARY OF WORK
   
This medium scope specification covers requirements for basic description and special administration instructions of the selected project.
         
Download
PDF

01 33 00
(01330)

12/06
SUBMITTAL PROCEDURES
    This broadscope section covers data, normally submitted for review, to establish conformance with the design concept, Affirmative Procurement/EPA Regulations, and the contract documents
         
Download PDF
01 35 43.00 99
(1355J)
12/06 ENVIRONMENTAL PROCEDURES
   
This guide specification covers the requirements for environmental protection , safety, and Affirmative Procurement. general information.
         
Download PDF
01 42 00
(01420)
11/06 SOURCES FOR REFERENCE PUBLICATIONS
    This section contains the listing of organizations whose publications are referenced in other sections of the specifications
         
Download PDF
01 57 23.00 99
(01356J)
11/06 TEMPORARY STORM WATER POLUTION CONTROL
   
Temporary construction measures most used in complying the Best Management Practices of the storm water pollution prevention plan as required by a NPDES Permit.
         
         

Download DIVISION 02 - EXISTING CONDITIONS

Download PDF
02 41 00.00 99
(02220J)
11/06 DEMOLITION
   
This broadscope section covers the demolition, dismantling, reconditioning and disposal of existing building materials, equipment and utilities
         
Download PDF
02 42 51.00 99
11/06 CARPET REMOVAL AND RECLAMATION
    This guide specification covers the procedures for removal and reclamation of used carpet, including EPA Affirmative Procurement requirements and Carpet America Recovery Efforts (CARE).
         
Download PDF
02 83 00.00 99
(13283J)
11/06 LEAD REMEDIATION
   
This guide specification covers the requirements and procedures for limiting occupational and environmental exposure to lead when removing lead-based or lead-containing paint (LBP/LCP)
         
         
Download DIVISION 07 - THERMAL AND MOISTURE PROTECTION
Download PDF
 07 01 60.71 99
(07001J)
11/06 FLASHING AND SHEET METAL REHABILITATION
   
This broadscope section covers wood blocking and furring for masonry walls; wood nailers and blocking for roof fascias, flashing, and cants; wood framing; rough bucks for openings in masonry walls; wood framing for architectural casework and equipment; dressed wood grounds to receive plaster and other finish materials
         
 Download  PDF
 07 52 00.03 99
(07550J)
11/06 MODIFIED BITUMINOUS MEMBRANE ROOFING (CCAFS/PAFB ONLY)
   
This guide specification covers modified bitumen sheet roofing. Hot mopped asphalt,[ torch applied,] hot air, and cold-applied adhesive applications are included. Both SBS and APP modified bitumen membranes are included
         
Download PDF
 07 72 00.00 99
(13220J)
 12/06 ROOF ACCESSORIES
    This guide specification covers the requirements for fall arrest anchors
         
         

Download DIVISION 08 - OPENINGS

Download PDF
08 17 43.00 99
(08550J)
11/06 INTEGRATED COMPOSITE DOOR OPENING ASSEMBLIES
    This guide specification covers the requirements for fiberglass reinforced plastic doors and frames
         
Download PDF
08 38 19.00 99
(08325J)
11/06 RIGID TRAFFIC DOORS
    This section covers monolithically (one piece) formed, insulated, high impact industrial traffic door systems
         
Download PDF
08 41 13.00 99
(08410J)
11/06 ALUMINUM-FRAMED ENTRANCES AND STOREFRONTS
   
This section covers aluminum entrances, glass and glazing, and door hardware and components
         
Download PDF
08 87 15.00 99
11/06 SOLAR CONTROL SAFETY FILM
    This section covers transparent film at least 0.10 mm (0.004 inch thick (4 mil)) applied to the interior side of glass to reduce solar heat gain, spalling, and fragment dispersal
         
         

Download DIVISION 09 - FINISHES

Download PDF
 09 56 00.00 99
(09251J)
11/06 TEXTURED CEILINGS
   
This guide specification covers the requirements for "popcorn" spray texture finish gypsum products
         
Download PDF
09 65 13.13 99
(09651J)
 11/06 RESILIENT BASE
   
This guide specification covers the requirements for Resilient Wall Base and Resilient Stair Treads
         
Download PDF
09 84 00.00 99
(09520J)
 11/06 ACOUSTIC ROOM COMPONENTS 
   
This guide specification covers the requirements for fabric covered acoustical wall panel systems
         
         

Download DIVISION 12 - FURNISHINGS

Download PDF
 12 51 00.00 99
(11670J)
11/06 OFFICE FURNITURE
   
This guide specification covers the requirements for interior consoles, credenza, and mapboard systems
         
         
Download DIVISION 13- SPECIAL CONSTRUCTION
Download PDF
 13 61 21.00 99
(02907J)
11/06 MAP BOARD SYSTEMS
    This broadscope section covers dynamic display (Map Board) systems and operator console systems
         
         
Download  DIVISION 23 - HEATING, VENTILATING, AND AIR CONDITIONING (HVAC)
Download PDF
 23 40 00.00 99
(15810J)
11/06 HVAC AIR CLEANING DEVICES
   
This guide specification covers the requirements for cleaning of HVAC systems
         
         
Download  DIVISION 26 - ELECTRICAL
Download PDF
 26 33 53.00 99
(16610J)
11/06 STATIC UNINTERUPTIBLE POWER SUPPLY
   
This section covers three-phase continuous duty, on-line, solid state uninterruptible power systems
         
         

Download DIVISION 27 - COMMUNICATIONS

Download PDF
 27 13 23.00 99
(16127J)
11/06 COMMUNICATIONS OPTICAL FIBER BACKBONE CABLING
   
This guide specification covers the requirements for single made (SM), multimode (MM) or mixed optical fiber cable for outside plant telecommunications
         
Download PDF
 27 15 00.49 99
(16714J)
11/06 INTERMEDIATE/RADIO FREQUENCY COMMUNICATIONS HORIZONTAL CABLING
     ISO 9001 approved Master Multipoint Radio Station facilities
         
         
Download DIVISION 33 - UTILITIES
Download PDF
 33 05 23.13 99
(02740J)
11/06 UTILITY HORIZONTAL DIRECTIONAL DRILLING
    This guide specification covers the requirements for directional drilling systems, equipment, piping and procedures
         
         

 


-- End of SGS Master --

Updated: April 29, 2008
SpecsIntact is a software product of the National Aeronautics and Space Administration (NASA), and is developed and maintained under the Joint Base Operations and Support Contract (J-BOSC) at the Kennedy Space Center.  All other products mentioned are registered trademarks or trademarks of their respective companies.
SpecsIntact Technical Support line - (321) 867-8800, Fax - (321) 867-1444
Email -
specsintact@jbosc.ksc.nasa.gov
Web Site Curator: Cheryl Fitz-Simon
NASA Official Responsible: Miguel Morales
If you have questions, problems or comments regarding this web site,
Email:  Cheryl.Fitz-Simon@jbosc.ksc.nasa.gov