To standardize the technical content of specifications, all agencies use the Submittal Descriptions.
SD-01 Preconstruction Submittals
SD-02 Shop Drawings
SD-03 Product Data
SD-04 Samples
SD-05 Design Data
SD-06 Test Reports
SD-07 Certificates
SD-08 Manufacturer's Instructions
SD-09 Manufacturer's Field Reports
SD-10 Operation and Maintenance Data
SD-11 Closeout Submittals
For
more information concerning Submittals, refer to the Section 01 33 00
Submittal Procedures,
Date | Description |
1999-10 | NASA and Navy adopted the Unified Submittal Format (CCB Disc #50. |
2000-10 | Army adopted the Unified Submittal Format (CCB Disc #54) |
2001-03 |
Military Services unified their specifications, creating the UFGS Master |
SpecsIntact has the ability to distinguish between the previous and current Submittal Descriptions, and will not allow Sections with differing formats to be mixed within a Job. A MTA tag identifies a Section containing the current Submittal Descriptions. The software will continue to support Jobs or Masters containing the older submittals.
To make the old Section in a Job or a local Master compliant with the current Submittal Descriptions, you must change the SD numbers and the Submittal Article Format using the SI Editor and add MTA tag.
Users are encouraged to visit the SpecsIntact Website's Help Center for access to all of our User Tools, including eLearning Modules (video tutorials), printable Guides, Knowledge Base containing Frequently Asked Questions (FAQs), Technical Notes and Release Notes, and Web-Based Help. For additional support, contact the SpecsIntact Technical Support Desk at (321) 867-8800 or KSC-SpecsIntact@mail.nasa.gov.