By default the SpecsIntact Explorer will automatically download and restore the Unified Facilities Guide Specifications (UFGS) Master. This will occur when no Master is connected or an older version of the UFGS is detected. Follow the prompts to download and restore the UFGS Master.
In the even a manual download must be initiated, the UFGS Master may be downloaded from the DoD Whole Building Design Guide (WBDG) or some limited Local Masters at the SpecsIntact Website.
In the event a manual download must be initiated, the UFGS Master may be downloaded from the DoD Whole Building Design Guide (WBDG) or Local Masters at the SpecsIntact Website. After you have downloaded the Master, you can quickly add it to SpecsIntact by using the SI Explorer's File menu, Backup and Restore command and choosing the Restore tab. Follow steps 1 - 6 below and then follow the Restore Instructions.
The download processes below will vary depending on the Browser you use!
Before downloading any Master, create a destination folder to receive it. (e.g. C:\SI Downloads)
From our Masters page, under Downloads, select the UFGS Master link, this will direct you to the WBDG Website
Within the table, locate the UFGS Master and choose the Zip link beside it to download the entire UFGS Master
In the Save As dialog box, browse to the folder you created in step #1 above and select Save
(If your browser does not allow to Save As, once the download is complete, check the Downloads folder)
When the download is complete, open the SI Explorer
From the File menu, select Backup and Restore or Right-click and choose Backup and Restore, then select the Restore Tab.
Under Restore From, locate the drive, folder, and zip file you just downloaded.
When you select the Masters zip (example: UFGS_M.zip) file, the information about the Master will populate on the right side of the screen.
By default, Overwrite Existing will be selected.
Select OK
The Master will be unzipped to your default Working Directory and displayed in the left pane of the SI Explorer underneath the Masters Folder.
Before downloading any Master, Division or Section create a destination folder to receive it. (e.g. C:\SI Downloads)
From our Masters page, select the UFGS Link, this will direct you to the WBDG Website
Download individual Divisions or Sections you want, by clicking the ZIP link beside it
To narrow down your search, to a single Division by selecting from the 'Division' drop-down arrow, choose the Division and click Apply.
In the Save As dialog box, browse to the folder you created in step #1 above and select Save
When the download is complete, close your browser and locate the folder containing the Master .zip file(s) you just downloaded
Double-click the .zip file to extract the Master Divisions or Sections and close the folder
Open SpecsIntact, and from the SI Explorer, open the Create New Master dialog box by either clicking the Masters Button on the Toolbar or by using the File > New > Master menu option
Complete the information on the General Tab and click OK.
In the Add Sections dialog box, click the Browse Tab and browse to the folder containing the downloaded Master Sections that you extracted from the zip file in step #6 above (you should see them listed in the Sections area in the bottom left corner of the dialog box).
Choose the Select All Button, then select the Add Sections Button. All of the Sections will be added to the new Master you created and you will see them listed in the right Contents pane of the dialog box.
Select OK and you will see the new Master listed in the left pane of the SI Explorer, with the Sections it contains listed in the right pane.
At any time, you can use the Setup > Connect Masters menu option to control which Masters are displayed in the SI Explorer.
Users are encouraged to visit the SpecsIntact Website's Help Center for access to all of our User Tools, including eLearning Modules (video tutorials), printable Guides, Knowledge Base containing Frequently Asked Questions (FAQs), Technical Notes and Release Notes, and Web-Based Help. For additional support, contact the SpecsIntact Technical Support Desk at (321) 867-8800 or KSC-SpecsIntact@mail.nasa.gov.