Bracket Verification

 

 

This command can be executed from the SI Explorer's File Menu > Process and Print/Publish > Reports tab.

 

The Bracket Verification Report (BRKTVER.RPT) lists all brackets remaining in the Sections that must be removed and replaced with text before a Job is complete.

Bracket Verification

 

Resolving Bracket Verification Errors/Discrepancies

Double-click on the Section Number to open the Section in the SI Editor.  The cursor will automatically be placed at the direct location of the bracket issue.  In order to resolve these problems, the Bracket Replacement Feature should be used.

 

• If a bracket was inadvertently left in the text, delete the bracket.
• If Bracketed Options were left in the text, a selection must be made or information filled in and the brackets deleted.

Consult with your architect or engineer to determine the correction option to include.

 

This report may accompany the Job if required by contract.

 

 

Additional Learning Tools

To learn more about Reports, their functions and how to correct the problems, refer to Chapter 6, in the QuickStart Guide found on the SpecsIntact Website's Help Center page.

Watch the Bracket Verification Report eLearning Modules within Chapter 6 - Correcting QA Report Errors and Discrepancies.

 

 

Technical Support Information

Users are encouraged to visit the SpecsIntact Website's Help Center for access to all of our User Tools, including eLearning Modules (video tutorials), printable Guides, Knowledge Base containing Frequently Asked Questions (FAQs), Technical Notes and Release Notes, and Web-Based Help.  For additional support, contact the SpecsIntact Technical Support Desk at (321) 867-8800 or KSC-SpecsIntact@mail.nasa.gov.